manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 91

 

DGPS MAX Reference Manual 

71 

 

 

Top Menu@ 

 

When accessed using the   button, this menu 
item returns the menu system to the main 
menu. 
 

5.9.1.3

 

DSP-ARM Menu 

The DSP-ARM status menu provides information relating to the status of 
the internal DSP and ARM processors of the internal SLX receiver of the 
DGPS MAX.  This menu is detailed in Figure 5-9. 

DSP:CarLock?YES+ 
DSP:BER?????YES^ 
DSP:DSPLock?YES 
DSP:FrmSync?YES 
DSP:TrkMode?YES 
ARM:GPSLock?YES 
ARM:DifData?YES 
ARM:ARMLock?YES 
ARM:DGPS????YES 
ARM:Solutn? YES 
Back@ 
Top?Menu 

 

Pressing the   and   keys allows you to scroll through the available 
menu items.  Pressing the   button anywhere in this menu will provide a 
bar chart of signal tracking information.  Pressing the   button with the 

Back@

 or 

Top Menu@

 item in focus will take the menu system to the 

previous menu or the Main menu, respectively.   

DSP:CarLock 

 

The DSP:CarLock is a description of the L-band 
carrier lock. Under normal operation, this field 
should indicate YES.  

 

 

DSP:BER????? 

 

 

This is an indication of whether or not the internal 
L-band receiver has acquired a Viterbi lock (signal 
lock).  Under normal operation, this field should 
indicate YES.  

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands