CSI Wireless DGPS MAX, Reference Manual

Page: 79 / 176

DGPS MAX Reference Manual
59
WAAS@
When this menu is accessed using the
button, the DGPS MAX menu displays the
contents of the DGPS menu.
Depending on the differential mode of
operation, this menu will be named WAAS,
OmniSTAR, Beacon, Extern RTCM, or
Autonomous. Inside this menu will be status-
related information and configuration
parameters. The structure of this menu differs
from one DGPS mode to another.
Config Wizard@
When this menu item is accessed using the
button, the Configuration Wizard will begin.
This feature allows you to easily configure the
DGPS MAX step-by-step. This feature is
described in detail in Chapter 6.
System Setup@
When this menu is accessed, the menu system
will display the contents of the System Setup
menu. Inside this menu, you’ll have the ability to
change baud rates, view the current applications
in memory, customize the display parameters,
and monitor the versions of firmware installed in
the DGPS MAX receiver.
5.9 GPS Menu
The
GPS@
menu contains sub-menus that provide access to position and
satellite status information, and GPS receiver configuration parameters.
Please note that the icon in the lower corner of the display will change
according to the GPS fix as shown in Figure 5-3. This portion of the menu
system, including submenus, is detailed in Figure 5-9.