manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 128

 

DGPS MAX Reference Manual 

108 

 

When accessed using the   button, this menu 
item returns the menu system to the main menu. 
 

5.15.1

 

Display Applications Menu 

This menu displays the current application in use and the other application 
not in use.  This menu system is detailed in Figure 5-15. 

In Use: WAAS    
Other : OmniSTAR 

 

5.15.2

 

Display Format Menu 

This menu provides access to DGPS MAX configuration information and 
sub-menus.  This menu system is detailed in Figure 5-15. 

DispUpdate@5 Hz

A

 

LL [email protected] 
Hgt Unit@meters 
Vel Unit@km/h 
Back@ 
Top Menu@ 

 

Pressing the   and   keys allows you to scroll through the available 
options.  Pressing the   button with any item in focus will take the menu 
system to that submenu.  Pressing the   button with the 

Back@

 or 

Top 

Menu@

 item in focus will take the menu system to the previous menu or 

the Main menu, respectively. 

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands