manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 110

 

DGPS MAX Reference Manual 

90 

5.11.1.1

 

Difstatus Menu 

This menu provides details on the OmniSTAR differential service.   This 
menu is detailed in Figure 5-11. 

Subscription?OK+ 
Region???????OK^ 
Sat?Link?????OK 
Maritime?????OK 
Remote?Site??OK 
Almanac??????OK 
Position?????OK 
Time?????????OK 
Sat?Update???OK 
Back@ 
Top?Menu@ 

 

Pressing the   and   keys allows you to scroll through the available 
options.  Pressing the   button with any status information in focus will 
display the signal tracking bar chart.  Pressing the   button with the 

Back@

 or 

Top Menu@

 item in focus will take the menu system to the 

previous menu or the Main menu, respectively. 

Subscription 

 

This menu item indicates if the current 
subscription is valid by displaying ‘OK’.  If a 
subscription is not currently present or has 
expired, it will display ‘BAD’. 

 

 

Region 

 

This menu item indicates if the receiver is currently 
operating within the intended region.  If the 
receiver is operating in the subscribed region, this 
item will display ‘OK’, otherwise it will display 
‘BAD’. 

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands