manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 101

 

DGPS MAX Reference Manual 

81 

 

 

Back@ 

 

When accessed using the   button, this menu 
item returns the menu system to the previous 
menu.   

 

 

Top?Menu@ 

 

When accessed using the   button, this menu 
item returns the menu system to the main menu. 
 

5.10

 

WAAS Menu 

This menu provides access to the WAAS signal status menu and a menu to 
choose the DGPS source.  Please note that the icon in the upper right 
corner of the display will change to a vertical satellite symbol as shown in 
Figure 5-4 when using corrections from the internal WAAS receiver.  This 
portion of the menu system, including submenus, is detailed in Figure 5-10. 

Signal Status@ 

A

 

Configure@     ^ 
Back@ 
Top Menu@ 

 

Pressing the   and   keys allows you to scroll through the available 
options.  Pressing the   button with any item in focus will take the menu 
system to that submenu.  Pressing the   button with the 

Back@

 or 

Top 

Menu@

 item in focus will take the menu system to the previous menu or 

the Main menu, respectively. 

Signal?Status@ 

A

 

 

Pressing the   button with this menu item in 
focus will take the menu system to the WAAS 
signal status menu. 

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands