CSI Wireless DGPS MAX, Reference Manual

Page: 139 / 176

DGPS MAX Reference Manual
119
6.1 Start-up Sequence
When you turn the DGPS MAX on, it will sequence through a startup
screen followed by a prompt asking if you’d like to use the Configuration
Wizard. To access the Configuration Wizard, press the button within
the 3-second timeout period.
Once the menu system enters into the Configuration Wizard mode, the
following prompts will be presented, starting with the more important
settings followed by settings of decreasing importance. This allows you to
immediately set the critical settings and quit the Wizard early, if you are
comfortable with the current settings that follow.
n
Use a previously saved configuration
n
Choose and tune (if desired) the DGPS source
n
Set the output data messages
n
Set the baud rates
n
Set the maximum DGPS age
You may cancel the Wizard at any time, without making any changes to
your current configuration by selecting
Cancel@
. You may quit the
Wizard early, while saving the changes that you’ve made by selecting
Save
and Exit@
. When the Wizard is complete and you are comfortable
with the new settings, choose
Finish@.
6.2 Using the Configuration Wizard After
Start-up
At any time after start-up, you may use the Configuration Wizard by
navigating to the Main menu and pressing the button when
Configuration Wizard@
is in focus. This will immediately begin the
Wizard process.