manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 133

 

DGPS MAX Reference Manual 

113 

5.16

 

Configuring the Receiver 

The following subsections provide detailed instructions for you to 
configure important operating parameters of the DGPS MAX.  

5.16.1

 

Changing the Source of DGPS Corrections 

To change the source of corrections used by the internal GPS sensor 
within the DGPS MAX receiver:  

n

 

Using the 

 or 

 key, move the DGPS menu, located in the root menu, 

into focus and press 

.  For example, when in WAAS mode, this menu will 

be called 

WAAS@

. 

n

 

Press 

 to move the 

Configure@

 menu item in focus and press 

. 

n

 

If required, press 

 to move the 

Diff@

 menu item into focus and press 

. 

n

 

Select the desired differential correction source (WAAS, OmniSTAR, 
beacon, Extern RTCM, or Autonomous) using the 

 or 

 keys and press 

. 

5.16.2

 

Changing the Output Data Messages 

To change data messages output by the DGPS MAX receiver:  

n

 

Using the 

 or 

 key, move the 

GPS@

 menu, located in the root menu, 

into focus and press 

. 

n

 

Press 

 to move the 

Configure@

 menu item in focus and press 

. 

n

 

Press   to access the 

NMEA I/O@

 menu. 

n

 

Adjust the message output as necessary by moving the desired message into 
focus using the 

 or 

 key and press 

.   

n

 

Adjust the output rate to that desired using the 

 or 

 key and pressing 

the 

 button. 

n

 

Continue for each data message as required. 

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands