manualshive.com logo in svg

CSI Wireless DGPS MAX, Reference Manual

Share
Download
CSI Wireless DGPS MAX Reference Manual Download Page 127

 

DGPS MAX Reference Manual 

107 

Display Apps@ 

A

 

 

When accessed using the   button, this menu 
item will display the current application in use and 
the other application not in use.   
 
The current applications present for the SLX are 
WAAS and OmniSTAR.  Both the WAAS and 
OmniSTAR applications support Beacon DGPS 
mode, external RTCM input, or autonomous 
operation.  It does not matter if which of 
OmniSTAR or WAAS is currently in use when 
choosing to use one of the other DGPS modes.  

 

 

Display Format@^ 

 

When accessed using the   button, this menu 
item provides a submenu that allows you to 
change the display properties, including the update 
rate of the display and the units associated with 
on-screen variables.  

 

 

Baud Rates@ 

 

When accessed using the   button, this menu 
will provide access to the baud rates submenu 
where the speed of the external MAIN and AUX 
ports may be changed.   

 

 

Software Disp@ 

 

When accessed using the   button, this menu 
will provide access to a submenu that allows you 
to query the DGPS MAX for each version of 
firmware. 

 

 

Back@ 

 

When accessed using the   button, this menu 
item returns the menu system to the previous 
menu.   

 

 

Top?Menu@ 

Summary of Contents for DGPS MAX

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands