27 issue 5
INSTALLING THE FIRE
16: SINGLE TRIM VERSION
Remove the
Fixing Frame
from
the box
The Frame can be fitted to the
builders opening using the screws
and Raul plugs provided by either
fixing it at the front or fixing inside
the builders opening.
If a fire surround is to be used then
it is recommended that the fixing
should be inside the builders
opening so as to not risk damaging
the fire surround.
If any gaps are present they must
be sealed with either fire cement or
ideally a high temperature silicone
sealant.
FIXING POINTS ON FRAME
ONCE THE FRAME IS FIXED THE INSIDE OF THE FRAME MUST BE SEALED ON BOTH
SIDES AND THE TOP , THE BASE MUST BE LEVELED OFF AND SEALED ,MAKING THE
CHAMBER FULLY SEALED AND ONLY ALLOWING THE FLUE TO PULL THROUGH THE
FIRE DIVERTER AND FROM NO OTHER PLACE
IMPORTANT
THE AIR FOR COMBUSTION IS DRAWN IN AT THE
BASE OF THE FIRE THIS MUST BE KEPT CLEAR AT
ALL TIMES
