7
Configuration of the CS-47 unit
The configuration of the CS-47 can be in 3 different ways:
1. Local configuration – using crow graphical interface (PC
software), connecting via D-link cable
2. Local configuration – using crow DTU board, in order to use
the DTU board the configuration must be load to the board
before the installation from a programmed CS47 unit
3. Remote configuration – using a cellular modem with sim card
in the same network, the tool for the configuration is the PC
software.
Graphical User Interface
The graphical user interface of the Mobile Bridge configuration wizard
consists of one window with four tabs, each containing parameters to
configure various options. The tabs are as follows:
Input – Use to configure up to four System inputs.
Output – Use to configure up to four System outputs.
Miscellaneous – Use to configure general System parameters.
Communication – Use to select the telephone dialing prefixe that will be
recognized by the System, for least cost call routing, and for communicating
with the unit.
Each tab contains a number of areas. For example, the Input tab contains
an area to select a specific input, an area to define the phone numbers that
will receive SMS messages about the input, and an area to define the
messages themselves
Summary of Contents for CS-47 GSM
Page 20: ...20...
