14
Note:
In order to receive messages as defined in the System OK area, the
user must send the Program Password to the system. This means that only
a user with the System Administrator password may activate such
messages.
a. Select the relevant option for sending messages. There are three
possible configurations:
•
SMS request
selected –the system sends the message at
the administrator’s request.
•
Enable
selected –the message is sent automatically at a
predefined interval.
•
Both
SMS request
and
Enable
selected –the system sends
messages both at a predefined interval, and at
administrator’s request
b. In the
Phone number
field, enter the phone number to which the SMS
message will be sent.
c. In the
Message
field, enter the text of the SMS message.
d. If
Enable
was selected in Step 2a,the SMS message is sent repeatedly,
at a predefined interval. In the
Interval
field, enter the number of hours at
which the SMS message will be sent.
Note:
This message can contain up to 15 characters, as noted in the
Chars
Left
field.
3.6.3
Configuration of the “phone line ” area
In this area you define the parameters of the SMS that will be sent when
the PSTN line fail and when it restores.
a. Select the
Enable
checkbox.
b. In the
Phone number
field, enter the phone number to which the SMS
message will be sent.
c. In the
Message
field, enter the text of the SMS message.
d. In the
Interval
field, enter the number of minutes at which the SMS
messages will be sent. As long as this field is set to a value greater than
0,the SMS message is sent repeatedly, until the power flow returns to
normal.
Note:
This message can contain up to 15 characters, as noted in the
Chars
Left
field.
Do the same for “phone line restored “ message.
Summary of Contents for CS-47 GSM
Page 20: ...20...
