background image

5

 

• 

Positions:

 

 

 

n

 

Neutral:

 Basic position where the height of  

 

    the 

War Machine®

 Pulley is comfortably  

 

    reachable at overhead arm’s length; Most  

 

   

War Machine®

 exercises can be performed  

 

    from Neutral Position.

 

 

n

 

Long Position:

  The height of the Pulley is  

 

    lowered from Neutral Position so that the  

 

    Handles are 1” from the ground

 

 

n

 

Short Position:

 The rope on the 

War Machine®

  

 

    is shortened so that the handles are 

 

    approximately 2 feet from the Pulley

 

 

n

 

Locked Handle Mode:

  

 

    • Begin with 

War Machine®

 in Neutral Position.  

 

    • Lock Both Carabiners to both Handle D Rings 

 

 

n

 

Static Position:

  

 

    • Begin in Neutral Position

 

    • Attach Handle Carabiners on to the

 

     

War Machine®

 Pulley Static Holes at the top 

 

      of the pulley housing by inserting the 

 

      carabiners from the bottom up.

 

•  If you experience any pain, discomfort, light- 

 

  headedness or extreme fatigue, STOP what you  

 

  are doing in a safe manner immediately. If  

 

  symptoms persist after you have stopped seek  

 

  the help of a physician right away. 

TERMINATION

 

of the battle

 

•  Stretch and Cool Down

Summary of Contents for War Machine




























Reviews: