Crivit 1-LD5029, Usage And Safety Instructions

Page: 24 / 207

- 22 -

You have selected a different speed than the speed used when determing your
stride length.

The heart rate monitor watch was developed for activities on a flat plane. Steep
hills or stairs will cause a reduced distance measurement.
The displayed heart rate is not correct

Ensure that the heart rate monitor watch is positioned and fastened correctly.

Do warmup exercises to warm up your skin before you begin your workout.

Ensure that the heart rate monitor watch has skin contact

Don’t wear the heart rate monitor watch too tightly around your wrist as this
may interfere with blood circulation and reduce measurement precision

The heart rate monitor watch should be worn slightly more tightly around your
wrist when working out

During very intense workouts or other activities which cause forceful or
arrhythmic movements of your wrist, the sensor may not be able to measure
your heart rate correctly.

If your heart rate monitor watch does not display your heart rate, relax your
wrist and remain motionless for a short while (approximately 10 seconds). Your
heart rate should now appear.

Your battery may require replacement.
Display readability is low / the backlight does not work

Perhaps your heart rate monitor watch has not been switched on yet. Press any
button.

The contrast setting may be incorrect. Increase the contrast as described under
“heart rate monitor watch initial setup”.

Your heart rate monitor watch may have overheated. Please allow it to cool
down.

The heart rate monitor watch may be too cold. Warm up the watch.

Dirt could be blocking the sensor on the back side of the watch. Clean the
watch with a dry, lint free cloth only.

Replace the battery.