Crivit 1-LD5029, Usage And Safety Instructions

Page: 14 / 207

- 12 -
1. Workout timer
Press SET while in workout mode to begin the heart rate measurement. The heart
symbol will blink on the display.
ATTENTION: All described subfunctions will only function if the workout timer is
running.
Press SET while in workout mode to stop the heart rate measurement. The heart
symbol will remain on without blinking.
NOTE: If the workout timer is stopped, the heart rate monitor watch will revert to the
normal time display after approximately 5 minutes.
Press and hold SET for 3 seconds to reset the workout timer time.
NOTE:
Resetting the workout timer time will also reset all data of the subfunctions.
Heart rate target zone
Within target zone
Above target zone
Below target zone
Automatic deactivation of the workout time (in workout mode)