M1503 User Guide ______________________________________________________________________ Version 1.3
Copyright © 2005-2013, Critical Response Systems, Inc.
All Rights Reserved.
- 8 -
1
Getting Started
1.1
Unpacking Your M1503
Your M1503 comes with the following parts and accessories
Holster
Lanyard/Bungee
USB Charging Cable
Charging Dock (Optional)
Wall Adapter Power Supply (Optional)
1.2
Engaging the Battery
Your M1503 contains an integrated lithium ion battery, which is disconnected prior to shipment using a small battery
disconnect switch located next to the data connector, under a protective dust cover. Prior to operating your pager, you
must engage the battery by sliding the disconnect switch toward the data connector.
Prior to disengaging the battery with the disconnect switch, the pager
should be turned off with the UI. Failure to do this could result in lost
message or settings information.
1.3
Turning the Pager On
Once the battery is engaged, the M1503 will automatically turn on. If the M1503 is turned off using the user interface
(5.8.7), you can turn it back on by simply holding down the blue
Select
key for 2 seconds.
