M1503 User Guide ______________________________________________________________________ Version 1.3
Copyright © 2005-2013, Critical Response Systems, Inc.
All Rights Reserved.
- 28 -
5.8.4.8.2
Alarm Time
Selecting the Alarm Time menu item opens a sub-page which allows you to set the time of the alarm. Using the
Up
and
Down
buttons to move right and left respectively, you may select each digit with the
Select
button. Then, again using the
Up
and
Down
buttons, you may change the digit and press
Select
again to save it. Once you have set the alarm time
correctly, you may press
Escape
to return to the main Alarm menu page.
5.8.4.8.3
Melody
The
Melody
parameter specifies which melody to play when the alarm goes off.
5.8.4.8.4
Volume
The
Volume
parameter specifies how loud to play the melody when the alarm goes off, either
Off
,
Low
,
Medium
, or
High
.
5.8.4.8.5
Dock Volume
The
Dock Volume
parameter specifies how loud to play the melody when the alarm goes off while the pager is in the dock,
either
Off
,
Low
,
Medium
, or
High
.
5.8.4.8.6
Vibrate 1
st
The
Vibrate 1
st
parameter specifies whether to issue a vibrate pulse just prior to sounding the alarm.
5.8.4.8.7
Sunday-Saturday
These parameters allow you to enable/disable the alarm on certain days of the week. Setting a particular day to
On
enables the alarm on that day of the week; setting it to
Off
disables the alarm.
5.8.5
Pager Info
The
Pager Info
screen shows the manufacturing information of the pager, including serial number, firmware revision,
hardware capabilities, and other information. Please contact your system administrator for the meaning and relevance of
this information.
