Using a J-Box Device or AV Bridge
To create a new Zūm space using a J-box device or an AV Bridge:
1. Press the SETUP button 5 times.
2. Press and hold the SETUP button until the LED on the device lights
(about 10 seconds). After approximately 3 seconds, the device LED
begins flashing slowly. This indicates that the Zūm space is now
created and in Joining mode, allowing you to add devices.
NOTE:
The device used to create the Zūm space is automatically added
to the space and does not need to be added in Step 2.
Using a Keypad, Dimmer, or Switch
To create a new Zūm space using a keypad, dimmer, or switch:
1. Press the bottom button 5 times.
2. Press and hold the bottom button until the LED on the device lights
(about 10 seconds). After approximately 3 seconds, the device LED
begins flashing slowly. This indicates that the Zūm space is now
created and in Joining mode, allowing you to add devices.
6
ZUMMESH-JBOX Series
Quick Start
Zūm™ Mesh Wireless J-Box Load Controllers