2. At each load controller in the space, press and hold the top button until
the LED lights (about 7 seconds) to change whether it is bound or not
bound to the keypad.
l
The LED flashes quickly to indicate that the load controller is bound.
l
The LED flashes slowly to indicate that the load controller is not
bound.
NOTE:
If all load controllers in the Zūm space are assigned as not
bound to the keypad, the keypad will restore its default
functionality and all load controllers will become bound to the
keypad.
3. Press the bottom button on the keypad 3 times to exit Binding mode.
Remote Binding Configuration
Remote Binding configuration is used when all load controllers in the Zūm
space are not accessible (i.e., there are j-box load controllers).
To change the load controllers that are bound to the keypad.
1. Enter Binding mode.
a. Press and hold both the top and bottom buttons until the LED
lights (about 5 seconds).
b. Press the top button three times.
c. Press the bottom button once. The LED on the keypad flashes
three times, pauses, then repeats.
l
The LED flashes quickly to indicate that the load controller is
bound.
l
The LED flashes slowly to indicate that the load controller is not
bound.
NOTE:
Use the keypad that has been selected for controlling the
load to perform the entire remote linking process.
14
ZUMMESH-JBOX Series
Quick Start
Zūm™ Mesh Wireless J-Box Load Controllers
