Crestron
Serial Mouse Control Driver
Software
•
In SIMPL Windows (page
13
):
- Assign touchpanel serial output signals
- Assign control system Two-Way Serial Driver signals
- Save, Compile, and load the project to the touchpanel
•
In VT Pro-e (page
16
):
- Set the RGB object to PAD 1 or PAD 2
- Set the project properties according to the RGB selected PAD area
Type:
Mouse
Communication via:
Cresnet
Serial Join:
1
(example)
- Save, Compile, and load the project to the touchpanel
Mouse Driver Operation via Ethernet Communications
•
Install Serial Mouse Control Driver software (page
3
)
•
Connect COM port of PC to COM port of control system with null modem
cable (page
10
)
•
Establish Ethernet communications between touchpanel and control system
and add a device ID to touchpanel IP Table and control system (page
11
)
•
In SIMPL Windows (page
13
):
- Assign touchpanel serial output signals
- Assign control system Two-Way Serial Driver signals
- Save, Compile, and load the project to the touchpanel
•
In VT Pro-e (page
16
):
- Set the RGB object to PAD 1 or PAD 2
- Set the project properties according to the RGB selected PAD area
Type:
Mouse
Communication via:
TCP/IP
Serial Join:
1
(example)
Device ID:
3
(example)
- Save, Compile, and load the project to the touchpanel
Driver Software Installation
To install the Serial Mouse Control Driver software, download the self-extracting zip file
from the What’s New page (Touchpanels section) or Downloads page (TOUCHPNL Library)
of Crestron’s website
(www.crestron.com)
. New users are required to register in order to
obtain access to the FTP site. Search for
TPAD*.EXE
. TPAD*.EXE will create two folders,
UPDD (Universal Pointer Device Driver) and UPDD Playback Utility, plus the PDF version
of this programmer’s guide.
CAUTION:
Crestron’s licensed version of the UPDD is based upon the manufacturers
default settings. With the exception of
name of pointer device and COM port selection,
DO
NOT
change default settings during setup. If altered, the settings cannot be reset and the
driver software must be uninstalled then re-installed. Reinstallation of Microsoft
Windows
may also be necessary.
Programmer’s Guide - DOC. 5916A
Serial Mouse Control Driver
•
3
