Software Crestron
Serial Mouse Control Driver
12. As shown on the next page, make sure that
Full Screen
is selected and, in the
Touch/Pad Area, select
Pad 1
(or Pad 2, if appropriate).
NOTE:
Pad 2 may be used if a second (or alternative setup) mouse driver is needed. The
Pad 2 may also be used for the Boeckeler Pointmaker® Video Marker telestrator, a video
annotation device by Boeckeler Instruments
(www.pointmaker.com)
. For further information,
refer to the latest revision of Pointmaker Telestrator Programmer’s Guide (Doc. 5929). This
document can be obtained from the What’s New page (Touchpanels section) or Downloads
page (MANUAL and TOUCHPNL Libraries) of Crestron’s website
(www.crestron.com)
.
Search for TELE.PDF. New users are required to register in order to obtain access to the FTP
site.
RGB Video Properties Dialog Box
NOTE:
If desired, buttons with special reserved join numbers to specify additional mouse
and computer functions may be created. To create the buttons, refer to “
Appendix 2 -
Additional PC and Mouse Functions
” on page
24
.
13. Save, Compile, and load the project to the touchpanel.
14. The Serial Mouse Control Driver is ready for operation.
18
•
Serial Mouse Control Driver
Programmer’s Guide - DOC. 5916A
