Crestron DigitalMedia DM-NVX-350, Product Manual

Page: 82 / 96

76
•
DM-NVX-35x(C) Encoders/Decoders Product Manual – DOC. 7839M
Interoperability with DM NVX 4K60 4:2:0 and 1080p
Encoders and Decoders
DM-NVX-35x(C) devices are interoperable with DM NVX 4K60 4:2:0 Series and 1080p
Series encoders and decoders. The following table lists the 4K60 4:2:0 and 1080p
encoders and decoders based on functionality.
DM NVX 4K60 4:2:0 and 1080p Encoders and Decoders
FUNCTIONALITY DM NVX 4K60 4:2:0 SERIES DM NVX 1080p SERIES
Encoder Only DM-NVX-E20 DM-NVX-E10
Decoder Only DM-NVX-D20
DM-NVX-D200
DM-NVX-D10
If a DM-NVX-35x(C) device operating in transmitter mode is used with a 4K60 4:2:0 or
1080p decoder, the stream type of the DM-NVX-35x(C) transmitter must be configured
to interoperate with the decoder. In addition, the resolution of the DM-NVX-35x(C)
transmitter must be configured so that it does not exceed the resolution of the decoder.
NOTE: It is recommended that a DM-NVX-35x(C) transmitter not be used with a 4K60
4:2:0 or 1080p decoder in order to maintain the higher resolutions supported by the
DM-NVX-35x(C) transmitter. If a DM-NVX-35x(C) transmitter is used with a 4K60 4:2:0
or 1080p decoder, refer to EDID (Extended Display Identification Data) to set the
proper resolution of the HDMI input.
The stream type of a DM-NVX-35x(C) device operating in transmitter mode can be
configured using the web interface or SIMPL Windows.
Using the Web Interface
To set the stream type of a DM-NVX-35x(C) transmitter:
1. Click the Settings tab and then click Stream.
2. In the Stream Type drop-down list, select either of the following:
• Pixel Perfect Processing (Default): Sets the stream type to Pixel Perfect
Processing for interoperability with DM NVX 4K60 4:4:4 decoders
(default setting)
•
DM-NVX-D10/D20 Series: Sets the stream type for interoperability with
DM-NVX-D10, DM-NVX-D20, and DM-NVX-D200 decoders