Product Manual – DOC. 7839M
DM-NVX-35x(C) Encoders/Decoders
•
9
LAN 1: 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
LAN 2: SFP port;
Accepts one Crestron SFP-1G Series SFP transceiver module;
1, 2
Green LINK LED indicates Ethernet link status;
Green ACT LED indicates Ethernet activity
HDMI OUTPUT: 19-pin HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible)
HDMI INPUTS 1
–
2: 19-pin HDMI Type A connector, female;
HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort compatible)
3, 4
Two green LEDs, each indicates sync detection at the corresponding HDMI input
AUDIO I/O: 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio input or output;
Input Impedance: 24k Ohms balanced/unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
1
Either LAN 1 or LAN 2 can be used as the primary LAN connection, allowing the other port to be used for
connection to a local network device or to another DM NVX device. The port that is used as the primary
LAN connection requires connection to a 1000BASE-T switch in order to stream network video.
2
LAN 2 can connect to a fiber-optic network using the appropriate Crestron SFP-1G transceiver module
(sold separately). Refer to the SFP-1G Series Installation Guide (Doc. 7979) for information about installing
Crestron SFP-1G Series transceiver modules.
3
HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode
DisplayPort signal. CBL-HD-DVI interface cables are sold separately.
4
Device control via CEC requires integration with a Crestron 3-Series or later control system.
Summary of Contents for DigitalMedia DM-NVX-350
Page 6: ......
