Crestron DigitalMedia DM-NVX-350 Page 77 Product Manual Download

Page: 77 / 96

Product Manual – DOC. 7839M

DM-NVX-35x(C) Encoders/Decoders

•

Settings Tab – System Setup, Device Mode Lock Configuration

For additional information, refer to the online help of the web interface.

Crestron XiO Cloud Service Connection

The Crestron XiO Cloud® service allows supported Crestron devices across an enterprise

to be managed and configured from one central and secure location in the cloud.

Connection to the XiO Cloud service can be enabled or disabled using the web interface.

To configure the connection to the Crestron XiO Cloud service:

Click the Settings tab and then click System Setup.

In the Cloud Settings section, set the Cloud Configuration Service Connection

toggle switch in the On (right) or Off (left) position. The default setting is in the

On position.

Settings Tab – System Setup, Cloud Settings

For instructions about how to connect to the service, refer to the

DM-NVX-350, DM-

NVX-351, and DM-NVX-352 Quick Start

(Doc. 8391) or

DM-NVX-350C, DM-NVX-351C, and DM-NVX-352C Quick Start

as appropriate.

For information about using the service, refer to the

XiO Cloud Provisioning and

Management Service User Guide

(Doc. 8214).

Summary of Contents for DigitalMedia DM-NVX-350

































































































Search results

Summary of Contents for DigitalMedia DM-NVX-350

Reviews:

Related manuals for DigitalMedia DM-NVX-350

Brands by name

Popular brands

Crestron DigitalMedia DM-NVX-350, Product Manual

Search results

Summary of Contents for DigitalMedia DM-NVX-350

Reviews:

Related manuals for DigitalMedia DM-NVX-350

Brands by name

Popular brands