66
•
DM-NVX-35x(C) Encoders/Decoders
Product Manual – DOC. 7839M
8.
(Applicable to Remote USB mode only) Do either of the following:
•
In the Remote Device ID text box for Layer 2 transport, enter the MAC
address of the local extender.
•
In the Remote Device ID text box for Layer 3 transport, enter the IP address
of the local extender.
9.
(Applicable only when Automatic USB Pairing is set to Disabled) Click the Pair
button for each DM NVX device to be paired. Pairing Status indicates
Not Paired
until the Pair button is clicked for each device. When devices are paired, the
Pairing Status indicates
Paired.
To remove pairing between DM NVX devices, do either of the following:
•
If Automatic USB Pairing is disabled, click the UnPair button for each device that
is paired.
•
If Automatic USB Pairing is enabled, do either of the following:
-
For Layer 2, remove the current entry or enter
00:00:00:00:00:00
in each
Remote Device ID text box (Remote Device ID 1 through Remote Device
ID 7) as required.
-
For Layer 3, enter an unused IP address in the Remote Device ID text box.
Settings Tab - USB (Layer 2 with Automatic USB Pairing and Multiple Device Support Enabled)
For additional information, refer to the online help of the web interface.
Summary of Contents for DigitalMedia DM-NVX-350
Page 6: ......
