Crestron CEN-NVS200 Operations & Installation Manual Download | Manualshive

Page: 86 / 92

background image

Network Video Streamer

Crestron

CEN-NVS200

3. Use the Address Book in Crestron Toolbox to create an entry for the

CEN-NVS200 with the CEN-NVS200’s TCP/IP communication
parameters.

4. Display the “System Info” window (click the

icon) and select the

CEN-NVS200 entry.

Programs and Firmware

Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron Web site as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.

SIMPL Windows

If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.

Firmware

Refer to “Maintenance” which starts on page 76 for information. Check the Crestron
Web site to find the latest firmware. (New users may be required to register to obtain
access to certain areas of the site, including the FTP site.)

Program Checks

Using Crestron Toolbox, display the “System Info window (click the

icon) and

connect to the control system.

Edit the control system’s IP table to include an entry for the CEN-NVS200. The
entry should list the CEN-NVS200’s IP ID (specified in the SIMPL program) and the
actual IP address of the CEN-NVS-200. For example, IP ID = 05,
IP Address = 192.168.1.101.

82

•

Network Video Streamer: CEN-NVS200

Operations & Installation Guide – DOC. 7111A

«
...
84
85
86
87
88
...
»

Summary of Contents for CEN-NVS200





























































































Reviews:

No comments

Related manuals for CEN-NVS200

Brand: Radio Shack Pages: 7

Brand: Radio Shack Pages: 16

Brand: Comtech EF Data Pages: 102

Brand: Love Controls Pages: 2

Scan Converter VSC 500

Brand: Extron electronics Pages: 2

Brand: Aiwa Pages: 45

Brand: Patton electronics Pages: 10

Brand: Teac Pages: 18

Brand: Farenheit Pages: 30

Brand: Kramer Pages: 25

Brand: BZBGEAR Pages: 12

Brand: Phrontier Technologies Pages: 16

Brand: Wavtech Pages: 12

20km 10/100/1000WDM

Brand: Dynamix Pages: 2

Brand: ZIMO Pages: 79

Brand: Denver Pages: 50

Brand: Hall Research Technologies Pages: 12

HALF-RACK Series

Brand: RDL Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands