Network Video Streamer
Crestron
CEN-NVS200
Refer to the following RTSP streaming configuration guidelines.
Authentication:
From the drop-down list, select
disable
or
enable.
Access name for stream 1:
Enter an access name for stream 1 for connections from
client software when the codec type of the stream is MPEG-4. For example, when set
to live.sdp (default setting), the following URL connects directly to the MPEG-4
video:
rtsp://
ip address
/live.sdp
ip address
is the IP address of the CEN-NVS200.
live.sdp is the default access name.
Access name for stream 2:
Enter an access name for stream 2 for connections from
client software when the codec type of the stream is MPEG-4. For example, when set
to live2.sdp (default setting), the following URL connects directly to the MPEG-4
video:
rtsp://
ip address
/live2.sdp
ip address
is the IP address of the CEN-NVS200.
live2.sdp is the default access name.
Access name for stream 3:
Enter an access name for stream 3 for connections from
client software when the codec type of the stream is MPEG-4. For example, when set
to live3.sdp (default setting), the following URL connects directly to the MPEG-4
video:
rtsp://
ip address
/live3.sdp
ip address
is the IP address of the CEN-NVS200.
live3.sdp is the default access name.
Access name for stream 4:
Enter an access name for stream 4 for connections from
client software when the codec type of the stream is MPEG-4. For example, when set
to live4.sdp (default setting), the following URL connects directly to the MPEG-4
video:
rtsp://
ip address
/live4.sdp
ip address
is the IP address of the CEN-NVS200.
live4.sdp is the default access name.
RTSP port:
Enter the RTSP port number. The default port number is 554.
RTP port for video:
Enter the video channel port number for RTP (Real Time
Transport Protocol). The port number must be an even number. The default port
number is 5560.
RTCP port for video:
(Read only) Specifies the video channel port number for
RTCP (Real Time Transport Control Protocol). The port number is the port number
of the RTP video port plus 1. The default port number is 5561 (5560 + 1).
RTP port for audio:
Enter the audio channel port number for RTP. The port number
must be an even number. The default port number is 5558.
RTCP port for audio:
(Read only) Specifies the audio channel port number for
RTCP. The port number is the port number of the RTP audio port plus 1. The default
port number is 5559 (5558 + 1).
Multicast settings for stream 1/stream 2/stream 3/stream 4:
•
Always multicast:
Select the checkbox to enable multicast.
•
Multicast group address:
Enter the address to be used by sources to send
content and by receivers to receive content.
40
•
Network Video Streamer: CEN-NVS200
Operations & Installation Guide – DOC. 7111A
