Crestron
CEN-NVS200
Network Video Streamer
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
4
P O I G X X + -
4, 5
(1) 8-position 2.54 mm screwless terminal
block;
Camera control and digital I/O ports;
P
12 V, sources 400 mA @ 12 Volts
DC power for peripheral devices;
O
Digital output, 400 mA sink from
maximum 40 Volts DC, 2 kV
isolated;
I
Digital input, rated for 50 mA @ 12
Volts DC, 2 kV isolated, logic
threshold 3 Volts DC;
G
All ports referenced to ground;
+
RS-485, T+/R+, camera control port;
included built-in drivers for
DynaDome/SmartDome, Pelco D,
Pelco P, LILIN and Samsung
SCC-643
cameras;
-
RS-485, T-/R-, camera control port;
included built-in drivers for
DynaDome/SmartDome, Pelco D,
Pelco P, LILIN and Samsung
SCC-643
cameras
5
MEMORY
(1) MMC compatible card slot;
Accepts Multimedia Memory Card (MMC) up
to 16 GB
6
VIDEO
(1) BNC female (BNC to RCA adapter
included);
Composite video input;
Maximum input level: 1 V
p-p
nominal;
Input impedance: 75
Ω
nominal
7
AUDIO OUT
(1) 3.5 mm 3-conductor TRS mini-phone
jack;
Unbalanced stereo line level audio output;
Output level: 0.707 V
rms
nominal;
Output impedance: 16
Ω
minimum
8
AUDIO IN
(1) 3.5 mm 3-conductor TRS mini-phone
jack;
Unbalanced stereo (summed to mono) line
level audio input;
Input level: 0.707 V
rms
nominal, 1 V
rms
maximum;
Input impedance: 80 k
Ω
nominal;
External microphone mode: enables direct
connection of an electret condenser
microphone (ECM)
9
HW RESET
6
(1) Recessed miniature push button, used to
reboot the video streamer
1. To determine which is pin 1 on the cable, hold the cable so the end of the eight pin modular plug is
facing away from you, with the clip down and copper side up. Pin 1 is on the far left.
2. The pin out table indicates signal connections. DC power applied by Ethernet power sourcing
equipment (PSE) can connect to either signal pins or N/C pins.
Operations & Installation Guide – DOC. 7111A
Network Video Streamer: CEN-NVS200
•
11
