Crestron
CEN-NVS200
Network Video Streamer
Configuring Camera Tampering Detection Settings
To configure camera tampering detection settings, click
Configuration
on the
CEN-NVS200 home page and then click
Camera Tampering Detection
in the
column on the left side of the page. The “Camera tampering detection” configuration
page will open.
With tampering detection, the camera is capable of detecting incidents such as
redirection, blocking, defocusing or even spray paint.
“Camera Tampering Detection” Configuration Page – Camera Tampering Detection Pane
1. Check
Enable camera tampering detection
.
2. Enter the tamper trigger duration (10 – 600 seconds). The tamper alarm will
be triggered only when the tampering factor (the difference between current
frame and pre-saved background) exceeds the trigger threshold.
3. Set up the event source as
Camera Tampering Detection
on the “Event
Settings” page (refer to “Configuring Event, Server and Media Settings”
which starts on page 62).
Operations & Installation Guide – DOC. 7111A
Network Video Streamer: CEN-NVS200
•
55
