Creative PC-CAM 750, Getting Started Manual

Page: 24 / 59

Installing PC-CAM 750 1-7
4. Insert the new batteries according to the
directions shown in the battery compartment as
shown in Figure 1-4.
5. Close the battery compartment cover and then
push the catch outward to lock the
compartment cover.
Installing
PC-CAM 750
Refer to the instructions for your computer's operating system.
For users of Windows 98, Windows 98 SE and Windows Me, see “In Windows 98/98 SE/Me” in the
section that follows.
For users of Windows 2000, see “In Windows 2000” on page 1-9.
For users of Windows XP, see “In Windows XP” on page 1-10.
In Windows 98/98
SE/Me
1. Do not connect PC-CAM 750 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 750 connected, the Add New Hardware Wizard
dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 750 CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation.
You may be asked, after an application is installed, if you want to restart your computer. Select No until
all the drivers and applications are installed.
Figure 1-4: Inserting batteries.
Insert batteries
according to the
directions shown.