Creative PC-CAM 750, Getting Started Manual

Page: 26 / 59

Installing PC-CAM 750 1-9
6. When the PC-CAM 750 Camera Configuration dialog box appears, check the image
in the Video preview pane. If it flickers or displays a series of dark bands, click the Cancel Flicker
button.
7. Click the Finish button, and then restart your computer if you are prompted to do so.
In Windows 2000
1. Do not connect PC-CAM 750 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 750 connected, the Found New Hardware
Wizard dialog box appears. Click the Cancel button.
2. Insert the PC-CAM 750 CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation. You may be asked, after an
application is installed, if you want to restart your computer. Do not restart your computer until all the
drivers and applications are installed.
5. Connect PC-CAM 750’s USB cable to an available USB port on your computer (Figure 1-5). Place
PC-CAM 750 on top of your computer monitor or another flat surface.
Windows automatically detects the device.
6. Two Digital Signature Not Found dialog boxes will
appear, one at a time, telling you that Creative PC-
CAM 750 (Still Image) and Creative PC-CAM 750
(Video) (Figure 1-6) have been detected.
7. Click the Yes button. The PC-CAM 750 Camera
Configuration dialog box appears.
8. Check the image in the Video preview pane. If it
flickers or displays a series of dark bands, click the
Cancel Flicker button.
9. Click the Finish button, and then restart your
computer if you are prompted to do so.
Figure 1-6: Digital Signature Not Found dialog box.