Creative PC-CAM 750, Getting Started Manual

Page: 40 / 59

Using PC-CAM 750 as a Digital Camera 3-6
❑
Camera shake
Shaking the camera while taking pictures may also result in a blurry picture. So keep your hands
steady at all times for sharp, clear pictures.
To avoid shaking the camera, gently squeeze the Snapshot button.
If necessary, use both hands to hold the camera while pressing the Snapshot button.
Recording
Videos To start recording a video, do the following:
1. Press the Operation Mode button to select the Video Recording mode .
2. Aim the camera at the desired object, and use the camera’s viewfinder to verify that the object is in the
camera’s view.
Note: The object should be at least 75 cm (30 inches) away from the camera.
3. Hold the camera still and press the Snapshot button.
A beep is heard at the start of the recording.
The Video Recording mode icon flashes to indicate that the recording has begun.
4. The front red LED lights up and the camera-ready green LED indicator blinks. At this point, do not
shake the camera. When the video is complete, the indicator will go off.
5. Press the Snapshot button once more to end the recording.
A beep is heard at the end of the recording.
The recorded video taken is stored in the camera’s memory, and the counter value increases by one.
Recording Voices
or Sounds To start recording voices or sound samples, do the following:
1. Press the Operation Mode button to select the Audio Recording mode.
2. Position the camera near the sound source and press the Snapshot button once to start recording.
A beep is heard at the start of the recording.
The Audio Recording mode icon flashes to indicate that recording has begun.
The camera-ready LED indicator blinks.
3. Press the Snapshot button again to end the recording.
A beep is heard at the end of the recording.
In Video Recording mode, the
camera’s flash is automatically
disabled.