Creative PC-CAM 750, Getting Started Manual

Page: 20 / 59

Installing PC-CAM 750 1-3
Buttons and
LCD on
PC-CAM 750 The following section explains the functions of the buttons and LCD on your PC-CAM
750. Refer to Figure 1-1 on page 1-1 and Figure 1-2 on page 1-2 for the location of these buttons and
LCDs on your camera.
Buttons
The following buttons are found on your PC-CAM 750:
❑
Power button
To turn on your camera, press this button. You can only turn on your camera when it is disconnected
from the computer.
To turn off your camera, press and hold this button for two seconds.
Note: The camera will turn itself off if it is left idle for three minutes.
❑
Operation Mode button
This button will change the camera’s operation mode each time it is pressed. There are eight modes
of operation:
• Single snapshot (normal resolution)
• Single snapshot (high resolution)
• Single snapshot (low resolution)
• Self-timer single snapshot (normal resolution)
• Self-timer single snapshot (high resolution)
• Multiple snap shot
• Video Recording
• Audio Recording
To erase all the data from your camera, press this button together with the Snapshot button.
❑
Flash Mode button
This button will change the camera’s flash mode each time it is pressed. There are four flash modes:
• Auto
• Always
• Red Eye