Configuring your DSL Router 4-6
5. Click the
WAN DHCP Client
option
if your ISP provider provides you
with a Dynamic WAN IP address.
Click the
Next
button and proceed
to step 7.
Do not click the
WAN DHCP Client
option if your ISP provider provides
you with a Static WAN IP address.
Click the
Next
button.
6. When the
WAN Settings
web page
(Figure 4-8) appears, type in the
WAN IP address, subnet mask,
gateway and DNS IP address values
provided by your ISP in their
respective boxes. Click the
Next
button.
7. Click the
Finish
button.
8. Click the
OK
button.
9. Wait for your DSL Router to connect
to the Internet.
You can now start surfing the
Internet at high speed!
Figure 4-7
If you are using a
Static WAN IP address,
you must configure the
WAN IP address,
subnet mask, gateway
and DNS IP address.
Figure 4-8
If your DSL connection
is charged on the basis
of time online, turn off
your DSL Router when
it is not in use, to
avoid unnecessary
charges.
DO NOT
turn off the
computer or DSL
Router when the DSL
Router configuration is
being saved.
Summary of Contents for Broadband Blaster 8015U
