Setting up your DSL Router using Ethernet connection 2-4
Configuring
your Network
Interface Card
Before using your DSL Router, you need to configure your Network Interface Card.
In Windows XP/
Windows 2000
1. After setting up your DSL Router, turn on
your computer.
2. In Windows XP, click
Start -> Settings ->
Control Panel
and double-click the
Network Connections
icon.
In Windows 2000, click
Start -> Control
Panel
and double click the
Network and
Dial Up Connections
icon.
3. When the window similar to Figure 2-3
appears, right-click the
Local Area
Connection
icon, and then click
Properties
.
If you are connecting
your DSL Router using
the USB port, skip this
chapter and go to
"Setting up your DSL
Router using USB
connection" on page 3-1.
Figure 2-3
Summary of Contents for Broadband Blaster 8015U
