General Specifications
This section lists the general specifications of
your audio card.
Plug and Play
❑
ISA Specification version 1.0a compliant
Stereo Music Synthesizer
❑
4-operator 11-voice or 2-operator
20-voice stereo music synthesizer
❑
Compatible with previous Sound Blaster
music synthesizer chips
Stereo Digitized Voice Channel
❑
Full duplex
❑
16-bit and 8-bit digitizing in stereo and
mono modes
❑
Programmable sampling rates, 5 kHz to
44.1 kHz in linear steps
❑
First and Second DMA channels for audio
recording and playback
❑
Dynamic filtering for digital audio
recording and playback
Built-in Digital/Analog Mixer
❑
Mixes sources from digitized voice and
inputs from MIDI devices, CD Audio,
AUX, Line In, Microphone, and PC
Speaker
❑
Selectable input source or mixing of
various audio sources for recording
Volume Control
❑
Software volume control of Master
Playback Volume, Master Recording
Volume, Digitized Voice, and inputs from
MIDI devices, CD Audio, AUX, Line In,
Microphone, and PC Speaker
❑
Microphone level at 32 levels:
•
above 0 dB, it is in 3 dB steps
•
below 0 dB, it is in 1.5 dB steps
❑
All other sources at 32 levels in
1.5 dB steps
❑
Full software control of fade-in, fade-out,
and panning effects
Built-in Stereo Power Amplifier
❑
Four watts per channel with four ohms
stereo output
❑
Internal or External Audio Output
Amplifier
3D Stereo Enhancement Technology
❑
Increased depth and breadth in perceived
audio
❑
Enhances mono and stereo audio output
❑
Independent of speaker quality
❑
Independent of setup configuration (for
example, placement and alignment of
speakers with the listener)
MIDI Interface
❑
Built-in MIDI interface for connection to
external MIDI devices
Note: Your audio applications may
support only selected ranges of sampling
rates.
This manual downloaded from http://www.manualowl.com
