2
Checking System Requirements
Your card requires at least:
❑
An Intel Pentium or AMD K5 90MHz
computer with a VGA or SVGA card
installed
❑
4 MB RAM
❑
7.5 MB free hard disk space
❑
Windows 95
or Windows 3.1x with DOS 5.0 and a Plug
and Play (PnP) configuration manager
Changing Audio Card Settings
This section is organized as follows:
❑
Changing Hardware Resource Settings
❑
Enabling/Disabling Creative 3D Stereo
Enhancement Effect
❑
Enabling/Disabling Full Duplex Operation
❑
Enabling/Disabling Joystick Interface
❑
Enabling/Disabling the Built-in Amplifier
Changing Hardware
Resource Settings
The following tables list the possible default
settings used by various devices on your card.
When necessary (for example, when there is a
hardware conflict), you may change one or
more of these settings. For more details, see
Appendix A, “Understanding the Installation”
in the Getting Started manual.
Table 1: Input/Output (I/O) addresses.
Device
Default I/O Address
Range
Audio interface
220H to 22FH
Game/Joystick
interface
201H
MPU-401 UART
MIDI interface
330H to 331H
Stereo music
synthesizer
388H to 38BH
Table 2: Interrupt request (IRQ) line assignments.
Device
Default IRQ Line
Audio interface
5
Table 3: Direct memory access (DMA) channel
assignments.
Usage
Default DMA
Channel
First DMA
channel
1
Second DMA
channel
3
Table 4: BLASTER environment variables.
Parameter
Preferred Value
Axxx
A220
This manual downloaded from http://www.manualowl.com
