![background image](http://html1.mh-extra.com/html/crary/air-reel-1010/air-reel-1010_owners-manual_2679350036.webp)
PN 12069 R072208
32
ASSEMBLY
4.15 hYdRaulic moToR
Fasten with the supplied 1/2” x 1-1/2” bolts, wash-
C.
ers and locknuts.
Tighten shaft coupler bolts to 17 ft-lbs.
D.
Torque the 1/2” locknuts to 75 ft-lbs.
E.
Slide the brace clamp assemblies onto each end of the
4.
manifold. Do not tighten at this time.
Slide the shaft coupler onto the reel drive shaft (right hand
1.
end).
Insert the 5/16” x 1-1/4” bolts through the shaft coupler and
2.
install locknuts. Do not tighten yet.
Install the hydraulic motor (Figure 30).
3.
Line up the key on the shaft of the hydraulic mo
-
A.
tor with the keyway of the shaft coupler. It may be
necessary to rotate the reel.
Align the mounting holes of the hydraulic motor with
B.
the holes of the motor mount.
Figure 30, Hydraulic motor installation
noTe
The brace clamp assemblies will be used during reel to header
assembly.