![background image](http://html1.mh-extra.com/html/crary/air-reel-1010/air-reel-1010_owners-manual_2679350045.webp)
PN 12069 R072208
41
ASSEMBLY
4.23 oPTional eQuiPmenT
4.23.1 auXiliaRY Reel Tine KiT
The auxiliary reel tine kit is recommended for crops that do not
feed well at the ends of the header.
Remove one 1/2” X 1-1/2” hex bolt, two 1/2” flat wash-
1.
ers, one pivot strap bushing and one 1/2” center locknut
(Figure 40).
Assemble the auxiliary reel tine assembly with two steel
2.
machine bushings as shown in Figure 41.
Place all controls in neutral or off, stop combine engine, set
parking brake, remove ignition key, wait for all moving parts
to stop, then properly block machine before servicing, ad-
justing, repairing, or unplugging.
WaRninG
Make sure the pitch of the auxiliary reel tines line up with the
existing reel tines.
noTe
Rotate the auxiliary reel tine assembly until the square end
3.
sets into the square hole of the pivot strap.
Insert the 3/8” X 2-1/2” carriage bolt through the square hole
4.
of the auxiliary reel tine assembly and fasten the 3/8” flat
washer and 3/8” center locknut.
Tighten the 3/8” center locknut to 30 ft-lbs.
5.
Repeat Steps 1-5 for each auxiliary reel tine assembly be-
6.
ing installed.
Figure 40, Loosen and remove hardware and bushing
Figure 41, Assemble auxiliary reel tine kit