PN 12069 R072208
33
ASSEMBLY
4.16 eccenTRic aRm
Slide an eccentric arm assembly over each end of the
1.
manifold, making sure that the end shield faces towards
the outside.
Position the pivot straps of the reel bat assemblies so that
2.
they point at the 10:00 position when looking from the right
side of the reel, or the 2:00 position from left side.
Press a pivot strap bushing into each plastic bearing on the
3.
reel arms of the eccentric arm assembly (Figure 31).
The plastic rollers should turn with the reel.
imPoRTanT
Bolt the eccentric arm assembly to the reel bat assemblies
4.
with a 1/2” x 2-1/2” button head bolt.
Adjust each plastic roller against the eccentric ring and
5.
tighten 3/8” hardware to 30 ft-lbs. You may need to insert ad
-
ditional washers between the roller and the eccentric mount
plate to center the eccentric ring on the rollers.
Figure 31, Eccentric arm installation