17
SECTION: G REPLACEMENT PARTS
G-1 ORDERING REPLACEMENT PARTS:
Your local Prosser distributor can supply parts and repair
service. When ordering parts, ALWAYS furnish the following
information: Specify pump model number as shown on
nameplate, serial number, part number, item number and
part name.
1. Pump serial number. (G-1)
2. Pump model number. (G-2)
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
G-1 SERIAL NUMBER:
The Serial Number block will consists of a six digit number,
which is specific to each pump and may be preceded by a
alpha character, which indicates the plant location. This
number will also be suffixed with a three or four digit number,
which indicates the date the unit was built (Date Code).
EXAMPLE: A012345 495
Reference the six digit portion (Serial Number) of the number
when referring to the product.
G-2 MODEL NUMBER:
This designation consist of numbers which represent, Pump
Line, Horsepower, Motor phase, Voltage and Variations (as
shown below). This Number is used for ordering and obtaining
information.
MODEL NUMBER DESIGATION
9 - 8 XX X X
PROSSER
HORSEPOWER
10 = 10
15 = 15
25 = 25
50 = 50
VOLTAGE
1 = 115
2 = 230
4 = 460
5 = 575
PHASE
1 = Single
3 = Three
Summary of Contents for PROSSER STANDARD-LINE 9-81000 Series
