Crane PROSSER STANDARD-LINE 9-81000 Series, Installation And Operation Manual

Page: 4 / 31

4
LIQUID TEMPERATURE ..................... 104°F (40°C)
DISCHARGE CASE ........................... 356T6 Aluminum, Hard Anodized
DIFFUSER .......................................... 356T6 Aluminum, Hard Anodized
SUCTION CASE ................................ 356T6 Aluminum, Hard Anodized with wear resistant polyurethane liner
FRAME & OUTER CASE ...................
6063T6 Aluminum, Hard Anodized
PUMP SHAFT .................................... Stainless Steel
IMPELLER ......................................... Hardened 17-4 Stainless Steel
HARDWARE ...................................... Stainless Steel
O-RINGS ............................................ Buna
SEAL:
Design
.........................
Tandem Mechanical, Oil Lubricated
INBOARD: Material ......................... Rotating Faces - Carbon
Stationary Faces - Ceramic
Elastomer - Buna-N
Hardware -300 Series Stainless
OUTBOARD
. Material
.........................
Rotating Faces - Silicon Carbide
Stationary Faces - Silicon Carbide
Elastomer - Viton®
Hardware - 300 Series Stainless
STRAINER ......................................... 300 Series Stainless Steel .25" (6.35mm) Holes
UPPER BEARING:
Design ......................... Single Row, Shielded, Ball
Lubrication .................... Prelubricated high-temperature grease
Load ............................. Radial
LOWER BEARING:
9-81000 & 9-81500 ....... Design
.........
Single Row, Ball, Angular Contact
9-82500 & 9-85000 .............................Double Row, Shielded, Ball, Angular Contact
Lubrication .................... Prelubricated high-temperature grease
Load ............................. Radial & Thrust
CORD ENTRY .................................... 50 ft. (15m) Strain Relief and Pressure Grommet for Sealing
MOTOR:
Design
.........................
NEMA B - Three Phase Torque Curve. Squirrel Cage Induction
Insulation ..................... Class F
CONTROL: Three Phase ................. Rainproof, NEMA 3R (NEMA 4 for 9-85000), Provides Circuit Breaker for overload and
short circuit protection
OPTIONAL EQUIPMENT ................... Watertight, NEMA 4 Con trol, Series Adapter Kit, Carrying Handle, Viton® Seals,
Hardened 440C Stainless Steel Impeller
WARRANTY INVALID IF CORRECT PROSSER CONTROL IS NOT USED AT ALL TIMES.
PUMP
SERIES
WEIGHT
PUMP ONLY CONTROL CORD EXPORT
9-81000
145lbs/66kg 12lbs./5.4kg 12/4 = .27lbs./Ft.
6/4 = .78lbs./Ft.
209lbs./95kg - 6.3 Cu. Ft.
230lbs./104kg - 6.3 Cu. Ft.
9-81500
150lbs./68kg 12lbs./5.4kg 12/4 = .27lbs./Ft.
6/4 = .78lbs./Ft.
214lbs./97kg - 6.3 Cu. Ft.
235lbs./107kg - 6.3 Cu. Ft.
9-82500 275lbs./125kg 12lbs./5.4kg 4/4 = 1.33lbs./Ft. 398lbs./181kg - 8.7 Cu. Ft.
9-85000 343lbs./156kg 12lbs./5.4kg 4/4 = 1.33lbs./Ft. 468lbs./212kg - 9.4 Cu. Ft.
SECTION: A - PUMP SPECIFICATIONS:
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN
ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT
INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED
MEDIA IS A COMMON OCCURRENCE.