Cradlepoint ARC CBA850 Manual Download Page 138

Page: 138 / 161

8.4.2

USB Serial Adapter Configuration

Baud Rate:

Select from the dropdown list.

•

110

•

134

•

150

•

200

•

300

•

600

•

1200

•

1800

•

2400

•

4800

•

9600

•

19200

Byte Size:

The number of bits in a byte. Select from: 5, 6, 7, and 8.

Parity:

Change this value to enable parity bit checking. Select from the following dropdown options:

•

None: No parity checking (Default)

•

Even: parity bit will always be even

•

Odd: parity bit will always be odd

•

Mark: parity bit will always be odd and always 1

•

Space: parity bit will always be even and always 0

Stop Bits:

Number of bits to initiate the stop period. Select from these dropdown values: 1, 1.5, and 2.

Hardware (RTS/CTS):

Use RTS (Request To Send)/CTS (Clear To Send) to enable flow control.

Software (XON/XOFF):

Use XON/XOFF to enable flow control.

www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Summary of Contents for ARC CBA850

































































































































































Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands

Cradlepoint ARC CBA850, Manual

Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands