Cradlepoint ARC CBA850 Manual Download Page 141

Page: 141 / 161

Get community string:

The “Get community string” is used to read SNMP information from the router. This string is like a password

that is transmitted in regular text with no protection.

Set community string:

The “Set community string” is used when writing SNMP settings to the router. This string is like a password. It is

a good idea to make it different than the “Get community string.”

8.5.1

SNMPv3

If you select SNMPv3, you have
several additional configuration
options for added security.

Authentication type:

Select the

authentication and encryption type that
will be used when connecting to the
router from the following dropdown list.
These settings must match the
configuration used on any SNMP
clients.

•

MD5 with no encryption

•

SHA with no encryption

•

MD5 with DES encryption

•

SHA with DES encryption

•

MD5 with AES encryption

•

SHA with AES encryption

Username:

Enter the Username configured on your SNMP host in the username field.

Password:

Enter the Password for your SNMP host in the password and verify password fields. This password must be at least

eight characters long.

Enable SNMP traps:

Enabling traps will allow you to configure a destination server, community, and port for trap notifications. Trap

notifications are returned to the server with SNMPv1.

www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Summary of Contents for ARC CBA850

































































































































































Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands

Cradlepoint ARC CBA850, Manual

Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands