Cradlepoint ARC CBA850, Manual

Page: 105 / 161

• MAC Address
: Select WiMAX modem by MAC Address.
• Unique ID
: Select by ID. This is generated by the router and displayed when the device is connected to the router.
Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement.
Value: If the correct values are available, select from the dropdown list. You may need to manually input the value.
The condition will be of the following form:
“ (When) is/is not (value) ”
For example:
“Type is not LTE”
“Port is USB Port 1”
Once you have established the condition for your configuration rule, choose from the other tabs to set the desired configuration. All
of the tab options –
General Settings , IP Overrides , IPv6 Settings , Ethernet Settings , Modem Settings , WiMAX Settings , CDMA
Settings , and SIM/APN/Auth Settings – have the same configuration options shown above in the WAN Configuration section (the
options for Configuration Rules are the same as they are for individual devices).
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299