Cradlepoint ARC CBA850 Manual Download Page 5

Page: 5 / 161

INTRODUCTION

Package Contents

•

CBA850 with integrated MC400 Multi-Carrier Software-Defined Radio modem

•

Universal 3G/4G/LTE antennas with dedicated active GPS antenna port

•

AC power adapter (12V, 1A, 1.5 meter cord)

WARNING:

using a power adapter other than the one provided may damage

the CBA850 and will void the warranty

•

Ethernet cable

•

Quick Start Guide

•

Mounting hardware

•

Warranty and regulatory information

•

ARC Series includes integrated 3G/4G business-grade modem with modem antennas

ARC CBA850LPE-VZ – 4G LTE/HSPA+/EVDO for Verizon

ARC CBA850LPE-AT – 4G LTE/HSPA+/EVDO for AT&T

ARC CBA850LPE-SP – 4G LTE/HSPA+/EVDO for Sprint

ARC CBA850LP3-EU – 4G LTE/HSPA+ for Europe

ARC CBA850LPE-GN – 4G LTE/HSPA+/EVDO for T-Mobile in US and Rogers, Bell, and TELUS in Canada

System Requirements

•

An Internet source: a Cradlepoint 3G/4G business-grade modem or USB broadband data modem with active subscription

•

Windows 2000/XP/7, Mac OS X, or Linux computer

•

Internet Explorer v8.0 or higher (standards mode only), Chrome, Firefox v2.0 or higher (PC and Mac), Safari v6.0 or higher
(PC and Mac), Opera

www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Summary of Contents for ARC CBA850

































































































































































Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands

Cradlepoint ARC CBA850, Manual

Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands