Cradlepoint ARC CBA850, Manual

Page: 130 / 161

8.1.7 LLDP
Select to enable Link Layer Discovery Protoocol.
8.1.8 System Logging
Logging Level: Setting the log level controls which messages
are stored or filtered out. A log level of Debug will record the
most information while a log level of Critical will only record
the most urgent messages. Each level includes all messages
from all of the levels below it on the list (e.g. “Warning”
includes all “Error” and “Critical” messages as well).
• Debug
• Info
•
Warning
•
Error
•
Critical
Enable Logging to a Syslog Server:
Enabling this option will send log messages to a specified Syslog server. After enabling, type
the Hostname or IP address of the Syslog server (or select from the dropdown menu).
Syslog Server Address: Select the Hostname or IP address from the dropdown menu, or type this in manually.
Include System ID: This option will include the router’s "System ID" at the beginning of every log message. This is often useful
when a single remote Syslog server is handling logs for several routers.
Include UTF8 Byte Order Mark: The log message is sent using UTF-8 encoding. By default the router will attach the Unicode Byte
Order Mark (BOM) to the Syslog message in compliance with the Syslog protocol, RFC5424. Some Syslog servers may not fully
support RFC5424 and will treat the BOM as ASCII text, which will appear as garbled characters in the log. If this occurs, disable this
option.
Log to attached USB stick: Only enable this option if instructed by a Cradlepoint support agent. This will write a very verbose log file
to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or you may lose some logging
data.
www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299