Cradlepoint ARC CBA850 Manual Download Page 94

Page: 94 / 161

STATIC

As with IPv4, static configuration is available for situations where the WAN IPv6 topology is fixed.

•

IPv6 Address/CIDR

– Input the IPv6 static IP address and mask length provided by your ISP (see

http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing

for an explanation of CIDR).

•

IPv6 Gateway IP

– Input the IPv6 remote gateway IP address provided by your ISP.

•

Primary IPv6 DNS Server

– (optional) Depending on your provider/setup, this may be required. This only takes effect if the

default global DNS setting on the

Network Settings

→

DNS

page is "Automatic".

•

Additional IPv6 DNS Server

– Secondary DNS server.

•

Delegated IPv6 Network

– (optional) Network available for delegation to LANs. Depending on your provider, this may be

required. Prefixes specified here only take effect if those supplied by the connection are insufficient to configure your LANs.

•

Delegated IPv6 Network

– Additional network available for delegation to LANs.

Example Configuration:

www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Summary of Contents for ARC CBA850

































































































































































Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands

Cradlepoint ARC CBA850, Manual

Search results

Summary of Contents for ARC CBA850

Reviews:

Related manuals for ARC CBA850

Brands by name

Popular brands