![background image](http://html1.mh-extra.com/html/cpi/t04co/t04co_installation-and-operation-manual_2675030049.webp)
M P A H U B M O U N T
Doc. 01031254 Rev. 1
3-17
3.8
Setup for Operational Service
Before committing the amplifier to operational service, you can set
the amplifier operating and interface parameters (for computer
controlled operations).
If computer controlled operation is desired, refer to Chapter 4 to
select the desired interface configuration and to drawings in
chapter 7 for CIF protocol document.
If the optional Remote Control Panel is to be used, the interface
parameters do not require adjustment. To change operational
parameters via the Remote Control Panel, use the procedure below
to change selected parameters:
a
Press
FUNCTION
until the option for the desired parameter is
displayed.
b
Use the
keys to change the parameter to the desired
value and press ENTER to accept the new value.
The unit is ready for operational service.
Summary of Contents for T04CO
Page 41: ...M P A H U B M O U N T Figure 3 5 Remote Control Unit Menu Tree Doc 01031254 Rev 1 3 9 ...
Page 68: ...O P E R A T I O N 5 10 Installation and Operation Manual This page intentionally left blank ...
Page 74: ...D R A W I N G S 7 2 Installation and Operation Manual This page is intentionally left blank ...