![background image](http://html1.mh-extra.com/html/cpi/t04co/t04co_installation-and-operation-manual_2675030025.webp)
M P A H U B M O U N T
2.4.2 Cooling
Considerations
The MPA Hub Mount is forced air-cooled by an internal fan which
draws air into the bottom of the unit. The air is exhausted through
ducts located on the front panel. Refer to outline drawing.
To insure proper operation of the amplifier, the following
guidelines must be observed:
•
There must be at least two inches of clearance on the bottom of
the unit (air intake).
•
There must be at least three inches of clearance on the end of the
unit that has the exhaust ducts (the end with the visible cooling
fins).
•
The hot exhaust air must be directed away from the air intake
area.
•
The area below the air intake must be free of foreign material,
loose dirt, debris, and any other material that may be drawn
toward the unit and block the air intake area.
Doc. 01031254 Rev. 1
2-3
Summary of Contents for T04CO
Page 41: ...M P A H U B M O U N T Figure 3 5 Remote Control Unit Menu Tree Doc 01031254 Rev 1 3 9 ...
Page 68: ...O P E R A T I O N 5 10 Installation and Operation Manual This page intentionally left blank ...
Page 74: ...D R A W I N G S 7 2 Installation and Operation Manual This page is intentionally left blank ...