![background image](http://html1.mh-extra.com/html/cpi/t04co/t04co_installation-and-operation-manual_2675030040.webp)
I N I T I A L P O W E R - O N A N D C H E C K O U T
3.3.3 Display and LED Group
Refer to Figure 3-4 for the Display and LED Group details.
ONLINE
AUTO
REMOTE
FAULT
STANDBY
TRANSMIT
TRANSMIT
STANDBY
METERS
FUNCTION
RESET
ENTER
AUTO/MAN
SWITCH
ONLINE
AUTO
REMOTE
FAULT
STANDBY
TRANSMIT
LOCAL RF OUT 127W
Display and LEDs
YELLOW
RED
GREEN
GREEN
GREEN
YELLOW
Single Line Display
20 Characters
RCUFP
1.
D
S
F
Figure 3-4. Display and LED Group
The menu tree shown in Figure 3-5 identifies the display messages
associated with each of the Remote Control Unit display modes.
When the Main Menu is displayed, the first part of the display
indicates the current control point set by the LOCAL/REMOTE
switch.
Seven sets of messages are possible when the Main Menu is
selected. Normally, one of the messages shown directly below the
Main Menu box in Figure 3-5 is displayed. If an ALARM condition
exists, one of the messages shown below the ALARM CONDITION
box is displayed. If a FAULT CONDITION exists, one of the
messages shown below the FAULT CONDITION box is displayed.
Press the METERS key to access the METERS menu. Press the
METERS key repeatedly to scroll through the seven messages
shown in Figure 3-5. Pressing this key an eighth time returns the
display to the MAIN MENU.
3-8
Installation and Operation Manual
Summary of Contents for T04CO
Page 41: ...M P A H U B M O U N T Figure 3 5 Remote Control Unit Menu Tree Doc 01031254 Rev 1 3 9 ...
Page 68: ...O P E R A T I O N 5 10 Installation and Operation Manual This page intentionally left blank ...
Page 74: ...D R A W I N G S 7 2 Installation and Operation Manual This page is intentionally left blank ...